中文 ENGLISH

Get Free Quote Now
Please node that we do not pass on ,or sell, your detals to third parties
Current Page: Home > About Us > Laboratory



Environmental Testing Lab

Aging oven

This aging oven can carry out aging tests for small lights and variety of components. It can also be used to assess the ability of components to withstand high temperatures.

Aging oven

Primary parameters

Power supply:380 VAC,50Hz

Max. consumption:9.5KW

Temperature range:+20°C~500°C

Temperature precision:±0.5°C

Heating rate: from room temperature to 500°C≤90min

Inner size(W×H×D):600×600×600mm

 

Temperature-humidity test chamber

This temperature-humidity test chamber is used to carry out thermal tests and humidity tests or both at the same time to verify the reliability of the products tested.

Temperature-humidity test chamber

Primary parameters

Chamber volume(W×H×D):1800×2100×1800mm

Temperature range:-40°C~+85°C

Temperature precision:≤±2°C

Temperature deviation:≤0.6°C

Humidity range:20~98%RH

Humidity deviation:≤±3%RH

Max. consumption:30KW

 

Versatile recorder

This versatile recorder can be used for real-time measurement of exterior/interior temperatures and humidity, as well as electrical parameters, of tested products.

Versatile recorder

Primary parameters

Input channel: 15 channels; voltage, thermal-coupler, thermal resistance and humidity values for each channel can be independently set.

Measuring objects: voltage, thermal-coupler, humidity.

Recording interval:10ms、20ms、50ms

Time-axis precision: 0.2 second/day

Power supply:DC10~28V

 

Draught-proof enclosure

The draught-proof enclosure can be used to eliminate the influence of flowing air when measuring the thermal rise of the products under normal/abnormal operating conditions.

Draught-proof enclosure

Primary parameters

Comply with the requirements prescribed by GB7000.1-2007 Annex D.

Structure: wooden floor, the remaining sides are made of double metal meshes, the space between meshes is 150mm, the perforation takes up 40% of the overall area of the mesh.

Inner size(W×H×D):2300×2500×2000mm

 

 

Infrared thermometer system

The infrared thermometer system consists of infrared thermometer and power supply. It is used to test the surface temperature of bulb spheres. To ensure that the lamp can work within the range specified in its technical specifications within various installation methods (hanging, side hanging) and ambient temperature range of design and use, to avoid the lamp temperature being too high or too low, causing blackening, Whitening, deformation, explosion, and changes in optical parameters.

Infrared thermometer system

Primary parameters

Infrared Thermometer
Temperature measurement range: 250~1650°C
Spectrum: 5 um
Resolution: 0.1°C
Accuracy: ±1% of reading
Response time: 60 ms
 

Power supply         

Power supply: 24VDC±20%, 500mA
Output: 0~20mA, 4~20mA analog output, RS485 digital output
Environmental protection level: NEMA-4 (IEC 529, IP65)
EMI: CE, IEC 61326, Performance Standard B
Relative humidity: 10% to 95%, non-condensing
Storage temperature: -20°C ~ 70°C
Ambient temperature: One water cooled 10°C ~ 175°C \ High temperature water jacket 10°C ~ 315°C
Weight: 1.95KG

 

Salt spray test machine

Mainly for metal parts, metal coating parts and coated with inorganic coating of metal parts to test the ability to resistance to salt spray corrosion, assess the protective coating quality and uniformity.

Salt spray test machine          

Primary parameters

Maximum power: 2.0KW
Temperature uniformity: ±2°C
Temperature fluctuation: ±0.5°C
Laboratory temperature: RT ~ 55 °C
Pressure tank temperature: RT~70°C
Heating rate: laboratory temperature RT→+50°C≤40min
Pressure drum humidity: RT→+63°C≤35min
Relative humidity: ≥85%HR
 
 
 

 

Simulation car transport shaker

The use of an eccentric bearing generates an elliptical trajectory during rotation to simulate the vibrations and collisions that occur during the transport of a car or ship.

 

 

Simulation car transport shaker           

Primary parameters

Rotation speed: 150-300RPM (r/min)
Vibration method: reciprocating (running horse type, elliptical type vibration)
Amplitude (P-P): 25.4 mm (1 inch)
Time setting range: 0 seconds - 99 hours
Speed control method: frequency control
Effective table size: 2500X1800mm (length X width)
 
 
 

 

Touch screen sine shaker

Assess the resistance of components, components and complete machines in the expected transportation and use environment

 

Touch screen sine shaker     

Primary parameters

Frequency range: 5-400Hz ± 1Hz
Vibration displacement: 0-5mm (adjustable p-p value)
Acceleration: 0-20g
Vibration direction: horizontal + vertical
Logarithmic frequency sweep cycles: 1-999 times
Scan rate: 0.1-99 oct/min 
 
 
 

 

IP waterproof test device

Ensure that the product's housing materials and processes meet the required IP protection levels and prevent water from entering the housing and causing harmful effects on the product

IPX3-IPX4 pendulum tube rain test device

Pendulum tube rain test device       

Primary parameters

Swing tube specification: R600mm, R800mm, R1000mm (optional)
Spray hole diameter: Φ0.4mm
Swivel angle: 120°(IPX3), 350°(IPX4)
Water spray: 0-10L/min (adjustable)
Water pressure control: 80KN/M2
Tube pendulum swing speed: IPX3 is 4S per swing (2X120°); IPX4 is 12S per swing (2X175°)
Swing tube drive method: Japan Mitsubishi 750W servo motor (accurate speed, angle)
Test time: 0-9999S

 

IPX3-IPX4 Handheld Sprinkler Tester (Applicable to IPX3 and IPX4 Testing of Large Products)

Handheld Sprinkler Tester          

Primary parameters

Water pressure: 50-150Kpa
Shower head material: Brass
Handle material: SUS304 stainless steel
Nozzle angle: 120°(IPX3), 180°(IPX4)
Rotating stage speed: 1rpm
Rotating stage rotation angle: 90°, 360° positive and negative rotation
 

 


IPX5-IPX6 nozzle test device

Primary parameters

Nozzle inner diameter: IPX5=6.3mm; IPX6=12.5mm
Flow range: 10-100L/min
Flow accuracy ±5%
Flow meter: LWGY-15 Stainless Steel Turbine Flow Meter
Water pump:CDL8-50 stainless steel water pump
 

IPX5 nozzle test device

IPX6 nozzle test device

 


IPX7 diving test device

 

Diving test device                      
 

Primary parameters

Water tank capacity: 600L

Sample rack depth: 1-1350mm adjustable
7-inch touch screen + PLC control mode: set test parameters (moving distance, speed, test time, number of times, etc.), read sensor (flow, pressure) data